Joined
·
23 Posts
Had a bit of trouble taking out the transmission filler tube plug. Just want to share it's design so you can easily take it out.
There's a plastic tab with a ledge that's latched on to the metal piece.
Put a screwdriver in between the plastic tab and the metal piece and pull it towards the center / filler tube to unlatch while pulling out. Hope this makes it easier for. someone doing a diy.
There's a plastic tab with a ledge that's latched on to the metal piece.
Put a screwdriver in between the plastic tab and the metal piece and pull it towards the center / filler tube to unlatch while pulling out. Hope this makes it easier for. someone doing a diy.
